While this issue can be due to various factors, it is not the most difficult to fix, as shown in this guide.
Why is my USB SATA drive not detected?
Listed below are some of the prevalent causes of the Sabrent SATA to USB not working issue:
Connection issues: Sometimes, the USB to SATA adapter is not recognized on Windows 10 issue can be caused by a bad physical connection. You need to check the ports and cable and try to connect the adapter to another PC to fix the issue. Insufficient power: In some cases, the SATA to USB adapter might not be showing up because the cable you are using for the connection is not supplying enough power. It would be best if you used the power cable that came with Sabarent SATA to restore normalcy.
What can I do if Sabrent SATA to USB is not working?
Below are some preliminary troubleshooting steps to try before exploring sophisticated solutions:
Connect to another port. Connect the adapter to an older PC like Windows 7
1. Check the drive connection
One of the most common causes of the Sabrent USB 3.0 SATA HDD docking station not working is a bad physical connection. To rule out this cause, it’s recommended to check if the USB port or the USB cable function as it should. Check the USB cable and also search for a light indicator that will let you know the hard drive is working, Additionally, you can check and see if the USB port on your computer is not by any chance damaged by unplugging the drive and using it on a different device or port on the same PC.
2. Update the driver
The Sabrent SATA to USB not working issue can sometimes be caused by an outdated or incompatible driver. To fix this, you should use the default drivers that came with your PC. To make things easier, however, we recommend using a third-party driver updater in DriverFix. Using this driver manager tool, you can access the online database containing thousands of authorized drivers ready to be installed for your devices. It would be best if you thus benefited from this automated support to update, install or fix any drivers with their latest versions in no time. ⇒ Get DriverFix
3. Use Sabrent’s power supply
If the above steps did not help you solve the problem, we recommend you use the power supply module that came with the Sabrent unit. The HDD you’ve prepared may have more power than can be supplied by a USB3 port. However, a USB3 port can only supply up to 0.9 amps. It is usually indicated that an HDD needs 1 amp to start up and over 2 amps for reading and writing, which could be why you should use the power supply unit Sabrent came with. That is all you should do to fix the Sabrent SATA to USB adapter not working issue. If you need a list of the best USB 3.0 external hard drive enclosures you can use, check our carefully-curated picks. In the comments below, let us know the solution that helped you fix this issue.
Name *
Email *
Commenting as . Not you?
Save information for future comments
Comment
Δ
