This happens when copying or moving files to an external SSD, but some users also get Micro SD card Error 0x800701E3. So, let’s find out all about it and the solutions that worked for others.

What is error 0x800701e3?

The error is encountered when copying or moving files. Some even came across Error 0x800701E3 while installing Windows due to the setup’s inability to install the relevant files to the drive. Here are a few reasons users encounter the error:

Improper connections: One of the most likely causes behind the problem, improper connections, trigger the error and lead to cases where the external drive doesn’t show at all. Failing storage drive: Physical damage or other major issues can also cause the error code external hard drive 0x800701E3. Bad sectors: When you have bad sectors on the drive, data can’t be written to it, and neither the one stored can be read.

How do I fix error 0x800701E3?

Before we head to the slightly complex solutions, here are a few quick ones:

Restart the computer and then try the operation. Make sure the connections are in order. If you have a spare cable, use it to connect the drive. Use another card reader for the job in the case of an SD card. If the drive has an indicator light that turns on after it’s plugged in, check whether it lights up. In some cases, being persistent is all it takes. So we recommend you give it a few more shots because, for some, the transfer went through after a couple of attempts.

If none work, move to the fixes listed next.

1. Run Check Disk

The Check Disk utility is a built-in tool that identifies issues with storage devices and bad sectors and takes the necessary measures to minimize their effects. And it should work when you get Error 0x800701E3.

3. Use a Health Check Software

Before we move forward, it’s important to check the drive’s health and identify what percentage of storage on it is available, amongst other critical factors. And that’s where a reliable drive’s health check software comes into the picture. SPONSORED Here’s how you can perform this action: Restoro’s technology replaces severely damaged Windows system files with clean, up-to-date ones from its secure online database. You can allow it to perform this action without harming your user data. This the ideal all-in-one tool for fixing Windows errors, PC crashes, or registry issues. It can boost the performance of your device and make it more secure within a few minutes. ⇒ Get Restoro Disclaimer: This program needs to be upgraded from the free version in order to perform some specific actions. It will run many tests on the hard drive, identify issues, and present them to you. This helps users figure out when a drive is about to fail to take the necessary action.

4. Repair the corrupt system files

Though unlikely to fix the problem, you can check for corrupt system files, as it has helped a few users. The DISM commands and the SFC scan will identify such files and replace them with the cached copy stored on the system.

5. Format the external drive

In some cases, you will need to format the external storage device when getting Error 0x800701E3 in Windows. You will lose out on the stored data, but it’s the only solution left. For those planning to get a new one, check our curated list of the best HDDs, cost-effective SSDs, and water-proof SD cards. For any queries or to share a solution with us, use the comments section below.

SPONSORED Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ