In this guide, we will walk you through some troubleshooting steps to resolve this error right after discussing the reasons for the issue’s occurrence. 

What does the DHCP is not enabled for ethernet error mean?

The DHCP is not enabled for ethernet means the device using the connection can’t receive an IP address or network configuration information from a DHCP server. Also, this will stop your device from communicating with other devices on the network. There could be various reasons for this error, but we have mentioned some of the popular ones here: 

The DHCP server is not working – If the DHCP is not configured or not functioning correctly, the ethernet connection won’t be able to receive an IP address or other configuration data from the DHCP server. Ethernet device is not configured to use DHCP – If your device is set to use a static IP address or DHCP is disabled in its network settings, you might get this issue. Ethernet cable/Device is faulty – If your ethernet cable or device is physically damaged, it might not be able to work correctly, hence the chances of getting the error. Network configured to use a different IP address method – If your network is configured to use static IP or IPv6, your ethernet will not receive an IP address from the DHCP server.

How do I fix DHCP not enabled for ethernet?

Perform the following preparatory checks to ensure that the warning message is not a result of fundamental issues which may require only subtle tweaks: SPONSORED

Restart your PC. Restart your router. Check updates for Windows. Uninstall any new software installed. Disable the use of a proxy server option. Remove extensions related to the network from browsers.

If these steps are not able to fix the issue, then proceed with the detailed troubleshooting steps mentioned below: 

1. Enable the Obtain an IP address and DNS server automatically option

2. Use the Command Prompt

2.1 Enable DHCP

2.2 Reset the network

3. Restart the DHCP Client service

4. Enable DHCP via router

5. Update the Network driver

Other than updating your drivers manually, you can use a specialized tool like DriverFix that can do that automatically by scanning your PC for outdated drivers and replacing them with the latest options. So, these steps to resolve the DHCP is not enabled for ethernet error. Try them, and feel free to let us know which worked for you in the comments section below.

SPONSORED Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ