Different causes could trigger this unusual behavior: recently changed/added hardware, hardware damage, improper hardware connections, and other issues. We came up with a series of fixes to help you fix this issue, so be sure to keep reading.

Why does my computer keep booting to UEFI?

It’s possible that your settings aren’t correct, thus causing the system to go directly to UEFI. To prevent that, you need to fix UEFI boot problems on your PC. Another problem can be legacy boot, so make sure you don’t have any Legacy Boot issues on your computer. Security settings can also lead to this issue, and sometimes you might get This PC must support Secure Boot message that prevents you from accessing Windows. Moreover, users reported many similar issues that we will cover below. Some of them are the following ones:

PC keeps booting to BIOS – Turn off Fast Boot and make the disk that contains your system the default choice. Get into the BIOS configuration utility. CyberPower PC keeps booting to BIOS – Replace the hard disk in question if the BIOS is unable to locate the hard drive that is listed under boot device. ASRock PC keeps booting to BIOS – The improper boot sequence might have caused the problem if your computer continues to load the BIOS screen upon startup. Gigabyte PC keeps booting to BIOS – Launch directly into the BIOS Setup menu, then navigate straight to the Boot Priority configuration page. It would help if you located the SSD once more right now. PC boots into BIOS instead of Windows – Turn off Fast Boot and make the disk that contains your system the default choice. MSI PC keeps booting to BIOS – The default configuration of the BIOS is to attempt to initialize the RAM two times, and if that fails, to enter the BIOS. ASUS PC keeps booting to BIOS – Make an effort to change the SATA settings. If, for some reason, it was set to the RAID mode, you should now set it to the AHCI mode.

Whatever the reason is, and whatever the error is, this guide will surely help you get over it and get back to using your PC correctly. Keep on reading!

What can I do if the PC keeps booting to BIOS?

1. Check the hardware connection

If you recently added new hardware, fiddled with the existing hardware, or moved your PC around, ensure everything is in order. Hardware not correctly plugged in could trigger the BIOS to open whenever you try to load Windows. Check the CMOS battery. Unplug all peripherals and try booting that way. Turn Off your PC and unplug all cords. Hold the Power button for a minute to discharge it. Plug in everything and check for the resolution.

2. Disable Fast Boot and set your system drive as the primary option

3. Check the CMOS battery

The CMOS battery provides power to the BIOS firmware inside your laptop, which is the software responsible for starting up your computer and setting the flow of data. You will know if the CMOS battery in your laptop has died, if it is difficult to start up your computer, if drivers on your laptop disappear, or if the date and time on your computer are inaccurate. SPONSORED You are free to remove our CMOS battery for a brief period and then put it back. After that, restart the computer, and instead of going into the BIOS, it should go straight to Windows. Using this method, you may also delete any BIOS password that may have been established. You will need to replace the battery if this method does not work.

4. Run the Windows Repair tool

Also, the USB type-C has gained quite some traction since its introduction to the tech space because it enables faster data transmission and quick charge for different devices. We strongly recommend you use a high-quality USB 3.0 flash drive. These great compact solutions can help you run the repair tool with no issues. You should pick a USB flash drive with enough storage for your needs, good read/ write speeds, and security to prevent virus infections.

What’s the difference between UEFI and BIOS?

The Basic Input/Output System, or BIOS, is the firmware discussed in the preceding section on the boot mechanism. Because it is stored on an EPROM (Erasable Programmable Read-Only Memory), the manufacturer can provide updates straightforwardly. It has a wide variety of utility operations that enable it to read the boot sectors of any associated storage and output information to the screen. The abbreviation UEFI refers to the Unified Extensible Firmware Interface. It performs the same functions as a BIOS. Still, there is one fundamental difference between the two: all of the information regarding initialization and starting is stored in a .efi file rather than on the firmware. This .efi file is kept on the hard drive within a specialized partition referred to as the EFI System Partition (ESP). We hope that our recommendations from this article were helpful for you to solve the unusual behavior of your PC. For more suggestions, please access the comments section below.

Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ